Project Rustaq Court Complex
Contractor Carillion Alawi LLC
“I confirm that AABCO successfully carried out the reinforcement shop drawings for the Rustaq Court Complex project. The overall support provided by AABCO staff team was very much appreciated.
I would have no hesitation in recommending them to another organisation to execute such services.”
Rajan P, Project Manager, Carillion Alawi LLC, Muscat, Oman
Project Ritz Carlton Hotel
Contractor Bouygues Batiment International
“AABCO realized for Bouygues between 2006 and 2008 the shop drawings for Ritz Carlton DIFC, including 245,000 m2 of flooring, 150,000 m3 of cement and 18,000 tonnes of iron. The mission was realized with total satisfaction by Bouygues Batiment International Dubai Branch and we appreciate how quickly it was done and the professional service from AABCO.”
Guy Fievet,Director, Bouygues Batiment International, Paris, France
City Abu Dhabi
Project Paris Sorbonne University and Al Ain University
Contractor Oger International
“We hereby are testifying that AABCO has performed on our behalf the Structural Design and Structural Shop Drawing for the Sorbonne University Abu Dhabi Project with regards to the following buildings: Library (Design & Shop Dwgs), Auditorium (Design & Shop Dwgs), Sports Hall (Design & Shop Dwgs), Residences Males (Design & Shop Dwgs), Residences Female (Design & Shop Dwgs), Guard Posts (Design & Shop Dwgs), External Works (Design & Shop Dwgs), Lecture Wings (Shop Dwgs), Administration (Shop Dwgs), Dining Hall (Shop Dwgs), Technical Building (Shop Dwgs) and Central Plaza (Shop Dwgs).
AABCO has as well performed all structural Shop Drawings regarding Al Ain University on the behalf of Oger Abu Dhabi. It consisted of Structural Shop Drawings for stages 1 and 2.
Oger is fully satisfied with works which have been performed by AABCO, in a good team spirit, pro-active manner and in accordance with structural international standards and local regulations.
AABCO's performances reached a high level of professionalism and we are issuing this attestation to Whom It May Concern.
Bertrand Philippe, Technical Director, Oger International, Abu Dhabi, UAE
City Abu Dhabi
Project Abu Dhabi International Airport expansion - Etihad Interim terminal
Contractor Murray & Roberts
“This note is a confirmation that AABCO undertook the preparation of Structural Shop drawings and the relevant bar bending schedules on our behalf at our Abu Dhabi airport project. AABCO's work was found to be accurate and conducted in a professional manner.”
Ramsay Abbassi, Regional Director, Murray and Roberts, Abu Dhabi, UAE
City Abu Dhabi
Project IPIC Headquarters Building
Contractor Commodore Contracting Co. LLC
“We hereby are testifying that AABCO has performed structural shop drawings and the relevant bar bending schedules for the IPIC Headquarters Project.
Commodore Contracting is fully satisfied with the work that has been performed by AABCO, and that was made as per our mentioned time schedule while insuring good quality of services.”
Mohamad Hajj Ahmad, Project Director, Commodore Contracting Co. LLC, Abu Dhabi, UAE
Project Mall of the Emirates
“I confirm that AABCO successfully carried out reinforcement shop drawing works for the Mall of the Emirates Project between 2003 and 2005. This was at the time the largest shopping mall in the Middle East.
I would have no hesitation recommending them to another company to execute such services.”
Philip Alcock, Project Director, Oman Procurement Team, Abu Dhabi, UAE
Project The National Museum
Contractor Carillion Alawi LLC
“We are pleased to write and advise that our sub-contractor AABCO have been employed on the above project for the last five months, during which time they have successfully produced our reinforcement bar drawings and bar bending schedules (BBS) for our concrete building structure.
The overall efficient level of service provided by AABCO on the above project has been consistently delivered in a prompt and professional manner. Without exception AABCO and representatives have provided us with a pro-active, helpful and friendly service.
All structural drawings released by our designers were carefully checked and reviewed by AABCO, and where necessary if information needed further clarification , technical queries were consistently raised in a timely manner through a properly logged system or request for information(RFI), which enabled us to forward these promptly to our Consultant. The efficient identification and early request for information enabled us to avoid delays when the BBS schedules were finally released and issued.
Workshop drawings produced by AABCO have always been clear and detailed to the level required, and provided sufficient information to the site team. To date all information produced by AABCO has been accurate and correct. Fortunately all BBS schedules have reached us on time on this project, which ensured that relevant information required for our cutting and bending operations were not delayed at any time.
AABCO have provided us with all round efficient and professional service and we would therefore not hesitate to recommend AABCO for the production of Reinforcement drawings and for bending schedules on any future project. ”
Phil Tyrer, Project Director, Carillion Alawi LLC, Sultanate Of Oman
Project Al Sifah Marina Boutique Hotel
Contractor Lupp Middle East LLC
“Lupp Middle East is testifying that AABCO has performed Structural Shop Drawing and the relevant bar bending schedule for the Al Sifah Boutique Hotel and AABCO's work was fully satisfying.”
Saif Al Omari, Finance Director, Lupp Middle East LLC, Sultanate of Oman
Project Al Waab City
Contractor Arabtec Construction LLC
“Arab Construction Co. confirm that AABCO provided services for the structural shop drawing and the reinforced steel bar bending schedules for Al Waab City in Doha, Qatar.
Arab Construction Co. have no hesitation in re-employing AABCO in the future.”
Fouad Nouman, Technical Manager, Arabtec Construction Co. WLL, Doha, Qatar
Project Muscat International Airport - Main Contract MC3
Contractor Bechtel & Co
“This letter is issued on request of AABCO, located at Gold Crest Executive Tower, Office# 1604, Sheikh Zayed Road, Dubai, UAE, to provide confirmation of its award and completion of the required Concrete Reinforcement Detailed Design scope for the Muscat International Airport project-Main Contract MC3, as a Subcontractor to the Joint Venture of Bechtel & Co. LLC and Enka & Co LLC.
AABCO was awarded the subcontract 18 December 2011 and completed its required Concrete Reinforcement Detailed Design scope 22 February 2012.”
Chris Riley, Subcontract Manager, Oman Procurement Team, Bechtel Enka Joint Venture, Muscat, Oman